Gardening is a very enjoyable hobby. But, because of most people's busy lifestyles, plants in our gardens might not always get the attention they deserve. But today this will end. What if you can remotely monitor your garden and give your plants the care they need?
There is a way! In this course, we are going to create an IoT-based smart gardening system using the Blynk App.
It's really hard to control ESP Board via mobile; creating a mobile application that can connect to an online server to send and receive commands to the ESP Board is a daunting task that requires mobile app development experience and takes a lot of time, effort, and in some cases, money.
But what if you can create a mobile interface using drag-and-drop features with zero programming experience to control and monitor any of the ESP Board pins?
Why you should take this course?
-
Learn how to create a wireless IoT smart garden with ESP32 and Blynk
-
ESP32 is a low-cost, low-power microcontroller that can be used as the basis for any IoT project
-
The course is the perfect introduction to the ESP32 and Blynk and will inspire you to build your own IoT projects
In this course, you will learn how to create an interactive mobile app interface in less than 5 minutes and connect it to your ESP Board via a free web server that will allow you to directly control your board and get a live reading from sensors and buttons, plus sending control data to LEDs, actuators, pumps, and motors.
We will use the knowledge you will gain from this course to create an IoT Smart Garden that has temperature, humidity, water level, and soil moisture sensors, and display sensors reading live on your mobile app. You will also use a button inside the app to control a pump to water your garden from anywhere in the world!
In this course, you will create a plant environment monitoring system that monitors soil moisture level, air temperature, humidity, and water level. Then, depending on the conditions, the system allows users to deliver what is needed remotely through a mobile app.
What You Will Learn In This Course
-
How to create an IoT garden using ESP and Blynk
-
The working principle behind this
-
How to connect the hardware components
-
What is Blynk and how to use it to control your project smartly
-
How to code your ESP to read and send sensor data via web interface
-
System operation
-
How to use the same methodology to make any device smart!
At the end of this course, you can create innovative IoT projects controlled by a mobile app with almost no programming experience required. The only thing that you need to do is THINKING, WIRING & CODING.
What You Will Learn
-
How to create an IoT garden using ESP32 and Blynk
-
Connecting and configuring hardware components
-
Using Blynk to control your project smartly
-
Coding ESP32 to read and send sensor data via web interface
-
System operation and real-time monitoring
-
Creating smart devices using the same methodology